APSRS-2BZMT Remote Car Starter for Vehicle's with Manual Transmissions

How a Remote Starter designed for vehicle's with a Manual Transmission works:

To insure safe remote starting of a vehicle with a manual transmission it requires a system specifically designed to be installed into vehicle's with a manual transmission. These systems install identically to a system for automatic transmissions with the addition of a few extra outputs & connections and a manual transmission compatibility setting. Known as a "Remote Start Ready Mode" this feature requires the driver to enable the vehicle to be remote started after the vehicle is parked:

While the vehicle is still running with the keys, the driver places the vehicle in neutral, set's the parking brake and then press and holds in the button on the remote until the dash lights flash. Then he turns off the ignition, removes the keys, and exits the vehicle. When the remote start ready mode is set correctly, the vehicle will remain running while exiting the vehicle. Once the driver's door is closed the driver presses the button on the remote 1X which will lock the vehicle's doors (if equipped with factory power door locks) and automatically shut down the engine. The vehicle is now ready to be safely remote started.

In the event that the driver re-enters the vehicle without activating the remote starter, opening the driver's door will cancel out the remote start ready mode and the driver would have to perform the remote start ready mode procedure again.

• Ordered Vehicle Specific for your Vehicle
• Vehicle Specific Step-by-Step Installation Guide (the majority w/Photos and Illustrations)
• Complete System No Additional Parts Needed
• Quick-Connect Installation Pkg.
• LED Test Probe
• Lifetime Tech Support access by Phone or Email 7 Days a Week
• 2 Year Limited System Warranty/1 Year on Remotes
• Pre-Set Polarities and Options
• Vehicle Compatibility Guarantee: The APSRS-2BZMT system is compatible to nearly 500 specific vehicles with manual transmissions. You will be ask to indicate the year, make and model of the vehicle when ordering. Vehicle compatibility will be checked before order is processed.

• Remote Starter w/Keyless Entry for Vehicles with Manual Transmissions
   
• Includes Two, 1-Button Remotes
   
• Momentary Clutch Activation Relay w/Parking Brake Input
   
• Extended Range Antenna w/Built-In Status LED:
  Any feature of the system can be remotely activated from up to 1500' away. Commonly mounted on the top inside center of the vehicle's windshield directly behind the rear-view mirror for optimal range. The antenna conveniently incorporates both the system's new remote programming button and status LED. This eliminates the need for any hole drilling in the vehicle and significantly reduces the amount of wire's needed to be run under the dash during installation.
   
• Heat/AC Activation:
  Just pre-set your vehicle's heat or AC controls and the system will turn on the vehicle's heat or AC shortly after the remote starter is activated.
   
• Multiple Remote Start Run Time Options:
  The system's remote start run time can easily be changed to run the vehicle for 5, 10, 15, 20, 45 or 60 minutes. Choice provided during checkout.
   
• Remote Keyless Entry:
  If your vehicle is equipped with OEM factory power door locks, the system will remotely lock and unlock your vehicles doors. This system will still work on vehicles' without OEM factory power door locks, it just won't be able to lock or unlock the doors.
   
• Parking Lights Flash:
  Visual confirmation when the remotes are used, the system will flash the vehicles parking lights (the four corner lights) when the vehicle is locked, unlocked and when the remote start is activated. The parking lights will also turn on solid when the vehicle is running by the remote starter.
   
• Diesel Compatible:
  Programmable crank delay settings for Diesel engines. The system can be set to turn the ignition ON, then wait 10, 15, 20 or 45 seconds before crank to allow for required wait-to-start indication.
   
• Safety & Security Brake Input:
  Mandatory connection that will immediately shut down the remote starter system if the vehicle's brake pedal is stepped on before the key's are placed into the ignition and the ignition is turned on (a.k.a. "key-take-over feature)
   
• Bypass Kit Port: Dedicated input used when installing the included bypass interface kit required for most vehicles on the road today equipped with factory installed anti-theft systems. This plug-in port eliminates any wiring needed between the remote starter module and the bypass kit.
   
• Vehicle Compatibility Guarantee:
  The APSRS-2BZMT system is compatible to nearly 500 specific vehicles with manual transmissions. You will be ask to indicate the year, make and model of the vehicle when ordering. Vehicle compatibility will be checked before order is processed.

• Vehicle Specific Ready: 
  You will be asked to indicate the Year, Make and Model of vehicle the APSRS-2BZMT system is going to be installed into during ordering.
   
• Step-by-Step, Vehicle Specific Installation Guide: 
  That indicates exactly which wire from the system connects to which wire in the vehicle, where the wire is located and how to test and confirm the wire using the kits supplied LED test probe.
   
• Vehicle Specific Ready Bypass Interface Kit
   
• Vehicle Specific Components & Hardware:
  Includes pre-wired external clutch activation relay, pre-wired system harness, any needed diodes, resistors etc are pre-wired into the system wiring, machine crimped insulated spade and ground connectors.
   
• Quick-Connect Installation Kit:
  3 different sizes of quick-connect T-Tap type connectors to accommadate the common gauges of wires found in a vehicle.
   
• LED Polarity Test Probe: 
  Easy to use polarity indicator used with the kits vehicle specific step-by-step installation guide to confirm the correct wire found in the vehicle.