Skip to main content

Replacement Remotes DIY Remote Starter Kits
Code Alarm-Prestige-Pursuit-Ford Replacement Remote Search
Flashlogic Vehicle Specific Plug & Play
Long Range Remote Upgrades
Vehicle Specific Ready Remote Starter Kits
Smartphone Control CarLink ASCL6
Remote Keyless Entry Kits Vehicle Specific Ready
Flashlogic Interface
1Z-VSS Vehicle Specific System
DIY 3Z-VSS Remote Starter Keyless Entry
DIY Prestige 901TM-VSS Vehicle Specific System
DIY 57TM-VSS Remote Starter Keyless Entry
Pursuit 183BPR-VSS Remote Starter Kit
DIY Prestige 787Z-VSS Vehicle Security Remote Start
Prestige APS997Z 2-Way Remote Starter
Prestige 596Z-VSS 2-Way LCD Alarm with Keyless Entry
Motorcycle Alarm
FlashLogic iDatalink DEI Firmware Programming
Code Alarm Remote Replacement Case Kits
Remote Car Starter Auto Alarm Keyless Entry Parts and Accessories
Digital Tilt Sensor Alarm Your Tires and Rims
Dual Zone Microwave Interior Sensor for Car Alarms Code Alarm MV3
Glass Break Detector for Car Alarms by Audiovox CAGBS
Transponder Key Bypass
Replacement Modules
Parts and Accessories 2
Code Alarm Prestige Window Stickers
Code Alarm Remotes Technical Support
Installing Programming Code Alarm Frequently Asked Questions
Contact Us 1-866-244-8004
OEM Factory Replacement Remote FOB
Returns Refunds Exchange Policy
Factory Alarm Shock Impact Sensor Upgrade
Anti Theft Starter Kill Keypad
DIY Remote Car Starters Product Reviews
VSS System 50 50 Payment Plan

Order by Phone processed by Stripe
50 50 Payment Plan

Dual Zone Microwave Interior Sensor

Car Alarm Microwave Interior Sensor
Dual Zone Microwave Interior Sensor MV3
Today's Sale Price:
You Save:
In Stock:16

Purchase Code Alarm MV3 Interior Sensor

Add an Extra Layer of Alarm Protection to your Vehicle
with the MV3 Microwave Interior Add-On Sensor for Aftermarket Alarm Systems:

  • Can be adjusted to detect movement around your vehicle (Zone 1): Generally the optimal setting is when you adjust the exterior setting to sense when someone is close enough to look into the drivers window. So basically the sensor is set to detect any perimeter movement between the side view mirror and the drivers door window. This is considered zone 1, and upon perimeter intrusion of zone 1, the sensor will send a negative signal to your systems  zone 1, stage 1 or warn-away input (depending on how your specific system describes it) that will cause your alarm to momentarily sound the alarm but not fully trigger it.
  • Can be adjusted to detect movement into your vehicle (Zone 2): Generally the optimal setting for zone 2 is when you adjust the interior setting to sense when, for example, you left your window down (or top down for convertibles) and someone reaches in to grab something and by the time they reach in up to their elbow the sensor will send a signal to your system's zone 2 which will fully trigger the alarm.
  • Zone Coverage and Sensitivity Choice: The sensor can be used to cover just zone 1 or 2 or both. And can be adjusted more or less sensitive then described above.
  • Bi-Color Status LED: Built-in Red & Green LED indicates sensor detection status. With the LED off the sensor is in stand-by. Green indicating Zone 1 trigger and Red indicating zone 2 being triggered. In sensor adjustment mode, this LED indicates the sensor's current sensitivity without triggering the alarm while adjusting and testing.
  • Exit/Arm Delay: Once the vehicle is exited and the doors are closed and after the alarm is armed, the sensor delays 30 seconds before protecting the set perimeter.
  • Compatible to the Majority of Aftermarket Alarm Systems: The MV3 is made by Code Alarm and the 4-pin/4-wire plug end meant to plug into specific Code Alarm systems can be cut off and directly wired to any installed aftermarket alarm system that is equipped with the required negative zone trigger inputs. We have installed and used these sensors on dozens of different aftermarket alarm systems from Viper to Bulldog systems.
  • Simple 4 Wire Hook-Up: Require's constant 12V power connection, Ground when armed output wire from your system and zone 1 and/or 2 input connections to your system.
  • Sensor Module Placement: For optimal coverage the sensor's module is surface mounted, installed in the front lower center of the vehicle. Con be mounted behind carpeting, foam, insulation and forms of plastic but not behind metal.
  • 1 Year Limited Warranty - Universal Installation Manual - Technical Support
  • Compatible to Aftermarket Alarm Systems Only: The sensor will not trigger OEM/Factory installed alarm systems.
DIY Vehicle Specific Remote Car Starters & Replacement Remotes

Sales/Assistance/Product Questions:
Toll-Free: 1-866-244-8004
Tech-Direct Help Line: 1-586-315-4005

Mon-Fri: 8am-7pm, Sat: 9am-5pm & Sun: 9am-3pm ET
CLOSED: Holidays & Holiday Weekends
Website, Sales & Support Office
50935 Washington St. Ste. 2
New Baltimore, MI. 48047


Latest Website Update: 09-25-2022 06:30 AM ET
©2002-2022 All Rights Reserved

Wire-to-Wire Vehicle Specfic Systems Remote Starters

Vehicle Specific Systems

Plug and Play Remote Starter Kits T-Harness

Plug & Play
Remote Starters

Code Alarm
Interior Sensor


Remote Car Starter Problems