|
|
|
|
Ford Edge DIY Remote Start Installation Kits
Get a head start on warming up your engine and fluids, defrosting the windshield, and getting the chill out of the interior before even leaving the house!
System Compatibility: 2007 to 2010 Ford Edge
Factory-fit, Complete T-harness installation eliminating any wire-to-wire connections
Go Straight from Delivery to Installation!
Vehicle-specific ready; no computer programmers, downloads, or anything additional required.
|
|
MSRP: |
$219.95
|
Sale Price: |
$184.95
|
Save: | $35.00 |
In Stock: | 11 |
 |
|
- 2007 to 2010 Ford Edge with Remote Keyless Entry
- All Plug-In T-Harness Installation
- In-Vehicle Programming; 2 Keys are Required to Program this System to Your Vehicle.
- Step-by-Step Illustrated Installation Guide
- Automatic Heat/Defrost/AC Activation
- 15-Minute Remote Start Run Time
- Active Key-Takeover
- Active Remote Shut-Down
- Estimated Installation Time: 60-90 Minutes
| |
Ford Edge Remote Start Features:
- Ford Factory Keyless Entry Remote Activation: Activate the remote starter using your existing Ford keyless entry remote(s). The distance you will get will be the same distance that you can lock and unlock the vehicle's doors now.
- With or Without Horn Beep Choice: You can activate this system in only 1 of 2 ways, either by pressing the LOCK button 3 times on your keyless entry remote, which will cause your vehicle's horn to beep, OR by pressing the LOCK/UNLOCK/LOCK sequence (without horn beep).
► Choice of activation sequence provided during checkout. Settings cannot be changed after installation.
- Automatic Heat/Defrost/AC Activation: Just leave your climate control settings on where you need them when parking the vehicle, and the system will automatically turn them on shortly after you activate the remote starter.
- 15-Minute Remote Start Run Time (standard): The system will automatically shut down after 15 minutes. Or if you like, you can choose a custom longer or shorter run time:
► Choice of run time options is provided during checkout. Settings cannot be changed after installation.
- Active Key-Takeover: The engine will not shut down when the driver's door is opened. After you enter the vehicle and put a key into the ignition and turn the ignition on, when you step on the brake to shift into gear, the remote starter automatically turns off, but the vehicle will remain running normally with the key (so you won't have to restart the vehicle everytime after you remote start it.)
- Active Remote Shut-Down: You can shut down the remote starter sooner the same way you activated it.
2007 to 2010 Ford Edge Remote Start Installation Overview:
- All Plug-In Installation: No wire cutting or splicing. 3 T-harness connections to the vehicle are all that's required to install this system into a 2007 to 2010 Ford Edge with remote keyless entry. 2 of the plugs are found on the left and right sides of the steering column under the steering column covers and 1 using the vehicle's OBD2 connector (see example photos below.)
- No OBD2 Diagnostic Plug Blocking: This remote starter system setup uses a Y-connector, keeping your vehicle's OBD2 port accessible for any diagnostic service. No need to unplug the remote starter system every time the vehicle's OBD2 port is needed for service or additional aftermarket components. You just remove the vehicle's OBD2 plug and plug it into the T-harness, then replace the plug with the identical OBD2 connector from the harness.
|
2 T-Harness Connections on Steering Column
|
1 OBD2 T-Harness Connection
|
In-Vehicle 2 Key Programming:
- No manufacturer programmers, dealership programming, computers, or downloads are involved. Pre-programmed, Vehicle-specific ready and only requires 2 keys to the vehicle for system-to-vehicle programming.
2 KEY PROGRAMMING PRECAUTION: Cannot use "CLONED" keys for system programming: Cloned keys are replacement keys that did not require programming to your vehicle during purchase; all they did was "cut" the key; access to your vehicle was not required to make the new key. This restriction applies to any brand or model of remote starter system that requires 2 keys for programming.
- Vehicle-Specific Factory Fit T-Harness: No wires or extra plugs to sort through that are left over and not used, meant for other Ford vehicles. This provides an easier-to-understand installation and a cleaner, more professional-looking install when finished. The plugs on the provided T-harness have just the connections you use for your specific vehicle, nothing else.
- Ford Vehicle-Specific Step-by-Step Installation Instructions: A clear & concise illustrated step-by-step installation guide that will walk you through every step of the installation. Written by professional installers for the DIY installer.
- Installation Video Demo: Can be viewed on our YouTube channel:

Remote Start Security & Safety Features
- Brake Pedal Monitoring for Security: The steering column remains locked, and if you step on the brake pedal before the ignition is turned on with a key, the remote starter will immediately shut down.
- Open-Hood Monitoring for Safety: The remote starter cannot be activated when the hood is open, and it would shut down if the hood were opened while the vehicle was running by the remote starter (the vehicle must be equipped with a factory-installed hood pin-switch to enable this feature).
2-Year "Red-Carpet" Warranty | Unlimited Support:
- 2-Year QC Warranty: Though it's highly unlikely you would ever need warranty service for one of our systems, and we are so sure of it that in the rare event that it happens, once one of our techs determines the problem, we will send you out the replacement within 72 hours with a prepaid return shipping package for the part we are replacing, at no expense to you; all your shipping costs are covered under your warranty. Warranty begins from the date of delivery.
- Unlimited 24/7 access to customer support is available by phone, email, our online live chat, and our after-hours call-back answering service, 7 days a week. Closed only on major holidays.
- 45-Day Money-Back Performance Guarantee: With proven quality & performance with tens of thousands of systems installed into vehicles seen on the road today, if you’re not totally satisfied with the quality or performance of your system after installation, just unplug the system from your vehicle, put everything back in the box, and just send us an email or give us a call, and one of our technicians will email you a prepaid return shipping label with an RMA# for a full refund with no restocking fees, at no cost to you. Believe it or not, the only time we really get a return is for 1 of 2 reasons: either they didn't install the system yet and they unexpectedly sold the vehicle, or they totaled it! It's true.
- Nationally Known Fortin Brand: Lift the restrictions you have with generic, off-brand, and rebranded systems that limit your options to only one online source. MotorCityAutobahn designs and assembles this system using Fortin's industry-leading components. If you do decide to upgrade your system or need a replacement part or remote in the future, not only can they be provided directly through MotorCityAutobahn.com, but you can also find any of the components and remote upgrades we provide available all across the USA, from big box consumer electronics stores online and off to most of your local automotive accessories shops.
Upgradeable Options: (sold separately):
- Long-Range Remotes Upgradeable: Not happy with the range that your factory remotes provide? Easily upgrade your system any time during or after installation with Fortin's RFK-411 long-range 1-button remote package. Just plug the antenna into the system harness, then route and stick the antenna to the windshield, and program the remotes to the system, and you're done. Boost the system's activation range to up to 2000'.
- SmartPhone Control: Have unlimited range to lock, unlock, and remote start your vehicle, all through youre Smartphone screen with Fortin's EVO-START Smartphone interface upgrade. Click HERE for complete details.
- Lights On While Running: This system has the ability to turn the vehicle's parking lights on while the vehicle is running by the remote starter (for vehicle's without autolights.) Please note that this option will require some quick-connect T-tap connections to wires in the vehicle, which are included with the additional parking lights relay add-on upgrade (part # PLR4.)
- Open Hood Pin-Switch: For vehicles not equipped with factory-installed hood pin switches, an optional aftermarket pin switch can be installed for extra safety that would inhibit the vehicle from being remote started while the vehicle's hood is open and shut it down immediately if the vehicle was running by the remote starter. Please note that this option would require running a wire from under the driver's dash through the firewall to out under the hood (part # HPS1.)
- Remote Start Inhibit On-Off Toggle Switch: A small mini toggle switch that's mounted under the driver's side dash through a pre-drilled 1/4" hole that, when placed in the ON position, will prevent the vehicle from being remote started (part # TS1.)
► Technical Note: All upgrade options indicated above, with the exception of the long-range remotes upgrade, will require wire-to-wire connections.
USPS 2-3 Day Priority Mail Insured Shipping:
- Auto-Tracking: You will automatically receive updates via email within 24 hours from shipping as your order moves through the USPS system and be notified when it's out for delivery.
- Shipped Insured. If, in the rare event, your order gets lost in the system, there's nothing you need to do; we make all the claims and just ship you another unit. Please note that this only insures delivery and not deliveries lost or stolen after the fact.
- Shipping within the USA, its territories, and PO/APO boxes.
|
|
► MotorCityAutobahn.com ► FordRemoteStart.Net ► AutoAlarmPro.com
 
Site Last Updated: 08/17/2025 10:34 AM ET
MotorCityAutobahn is an independent automotive aftermarket company and is not affiliated with, endorsed by, or sponsored by Ford Motor Company. All references to Ford are for product identification and application purposes only. All our components are designed in the USA & Canada and manufactured in the USA, Canada & Mexico. Vehicle-specifically assembled, CAD programmed, and QC'd in Michigan by our technicians before shipping. Providing vehicle-specific ready systems online since 2002.
©2025 MotorCityAutobahn LLC
|
|
|
|
|
|
|