Code Alarm CAGBS
Single Zone Ultrasonic Glass Break Detector
Ultrasonic Sound Detection Design. Discriminates between Low & High Frequencies to prevent false alarms: Example, you could slap your hand onto the drivers side window and the alarm would not trigger, but if you took your keys and slightly bounced them off the window the alarm would sound.
Equipped with an Extension Microphone to assure proper sensor positioning for all window protection.
Fully Adjustable Sensitivity.
1 Year Limited Warranty
Also compatible to any brand of Aftermarket alarm system that has an extra negative trigger input.
Code Alarm MV-3
Dual Zone Microwave Interior Sensor
The MV-3 microwave detector detects movement of mass within the interior of a vehicle, such as if someone tried to reach inside the vehicle though an open window or within the protected area for vehicles with their tops down, sunroof open or T-Tops off.
Code Alarm MV-3 Dual Zone Microwave Interior Sensor
Each Zone is Separately Adjustable
Warn-away Exterior/Perimeter Zone Protection: This feature can be adjusted to detect and warn-away someone within a foot or so of the vehicle by sending a pulse to the alarm systems siren and fully trigger the alarm if remaining within the protected perimeter for over 15 seconds
Can be surface mounted either by using the modules support brackets and the 2 included screws or using the included double-sided tape.
Plug-in compatibility for most newer Code Alarm, Audiovox, Prestige or Pursuit brand systems
Compatible to any Aftermarket alarm system with a extra negative trigger input (Aftermarket system must have a 2-stage trigger input(s) for the exterior zone to work)
Includes a Diode Isolated Y-Harness for systems with only one sensor input: With this harness, for example, you could share a systems one shock sensor input with both the existing shock sensor and the additional MV-3
ALA-DL1 5-Wire or Positive/Negative Power Door Locks Relay Control Module
For Any Aftermarket system with Keyless Entry thats being installed into a vehicle that requires a 5-Wire Relay set-up or Positive or Negative polarity to activate the power door locks or is also used to install aftermarket actuator's and/or door ajar/door popper actuators.
Headlights On For Safety Circuit (LOFS)
Add a "Lights-On-For-Safety" Feature to your Vehicle! Day or Night, this Circuit will turn ON & OFF your vehicles Headlights Automatically with the Ignition. Eliminates the possibility of driving without your Headlights ON.
20 Amp Fused Circuit.
Vehicle Specific Installation Instructions
Headlights Automatically turn ON with the Ignition ON and momentarily OFF during Starting of the Vehicle and Automatically OFF with Ignition OFF.
DISCLAIMER: All systems and/or parts provided by AutoAlarmPro.com include all the parts and information confirmed throughout the car alarm & remote starter industry to successfully provide the features & functions of the device as described when properly installed. AutoAlarmPro.com does not guarantee, nor imply that "anyone" can perform any required installation. Our VSS systems are stated "easier" to install due to the Vehicle Specific System (VSS) designed platform that significantly reduces the time, labor and additional parts & information needed to perform the work and should not be misconstrued as an "easy" or "no-brainer" "anyone-can-do-it" interpretation, presentation or product. No returns or refunds on applied electronic parts, warranty repair or replacement only. Electronic components still in its delivery state can be returned for refund within 30 days from date of delivery, restocking fee may apply. Contact Auto Alarm Pro.com for details or return authorization.
AutoAlarmPro.com/RemoteStarterPro.com 2002-2014All Rights Reserved All Products & Pricing are Subject to Change Without Notice
Online Since 2002 Located in Port Huron, MI. 48060